Hot Selling Product Inspection - Poll Cuse - Pre-shipment Inspection Services:
SUMMIT was founded in 2017 with an international inspection &
sourcing services provider registered in China. We are a
professional independent, third-party quality control services
provider, working in your interest to protect your production
conformity and quality in the supply chain.
Our Service Includes quality inspection, Factory Audit, Production
Monitoring, Initial Production Inspection, In-process Inspection,
Pre-shipment Inspection, Container Loading Inspection.
We can help you to follow the whole process for your order! Visit
the suppliers you want to work with, check the sample, monitor the
production, solve the problems in production, check your special
requirements in the production, do the final inspection before the
shipment . We provide inspection for Toys, Home Appliances,
Electronics, Mechanical Products, Hardware, Auto & Moto parts,
Clothing, Textile, Stationery, Furniture and Building Materials,
etc.
Pre-shipment inspection service include:
General on-site checking includes:
| √Quantity | √Product appearance |
| √Performance & function tests | √Workmanship |
| √Assembly | √Accessories |
| √Material | √Colors & logo |
| √Size & measurements | √Weight |
| √Assortment | √Carton condition |
| √Bar code scan test | √Packing & marking |
| √Shipping marks | √Warehouse condition |
What's the cost:
Our standard all-inclusive inspection cost is USD 128-218/man-day (no hidden fees) in any major manufacturing clusters in China.
Values included:
√ No extra charge for travel cost
√ No extra charges for inspections on Saturday or Sunday
√ Full-time experienced inspectors only
√ A detailed inspection report issued within 24 hours
√ Free consultancy before and after inspections
Product check (included but not limited to):
1. Quanity check:
The quantity check include ordered quantity, finished quantity,
unfinished quantity, packed and unpacked quantity, all data will be
recorded as below:
B. QUANTITY CHECK *Client’s requirement: Minimum of products finished for inspection: 80% 90% 100% Minimum of finished products packed into master cartons for
inspection: 80% 90% 100% |
| Description | Inspection Qty | Qty / Carton | Carton Qty | Order Quantity | Sample Size |
| Packed | Unpacked | Unfinished | Packed | Unpacked |
| Pool Cues-Red | 205 | 10 | 21 | 205 | 0 | 0 | 50 | 0 |
| Pool Cues-Blue | 607 | 10 | 61 | 607 | 0 | 0 | 50 | 0 |
| Pool Cues-Green | 270 | 10 | 28 | 270 | 0 | 0 | 50 | 0 |
| Pool Cues-Yellow | 128 | 10 | 13 | 128 | 0 | 0 | 50 | 0 |
| Total | 1210 | / | / | / | 0 | 0 | 200 | 0 |
2. Workmanship check:
This is the most important part of inspection, our inspector will
conduct full check as per the client's requirement. All defects
will be recorded in the report with pictures and comments.
| INSPECTION STANDARDS |
| Inspection standard | ANSI/ASQC Z1.4(formerly known as MIL-STD-105) |
| Sampling plan (Single) | 200pcs |
| General Inspection Level (Visual / Workmanship) | N/A |
| Workmanship: AQL for Critical / Major / Minor | N/A |
| Total number of packages (cartons) / No. of cartons selected and
inspected(Sampled cartons quantity is at least square root (√) of total cartons quantity of this lot) | Carton quantity for inspection: 20ctns |
| Number list of the selected cartons / packages | No carton number |
| A. VISUAL & WORKMANSHIP |
| Product description | S/S (sets) | Defective Description | Critical | Major | Minor |
Pool Cues (Red/Blue/Green/Yellow)
| 200sets | Thread ends | 0 | 0 | 4 |
| Broken | 0 | 1 | 0 |
| Gap | 0 | 3 | 0 |
| Dirty | 0 | 0 | 6 |
| Scratch mark | 0 | 0 | 4 |
| Dent mark | 0 | 0 | 2 |
| Total Defects Found | 0 | 4 | 16 |
| Max Allowed | 0 | N/A | N/A |
| Sample size | 200 | 200 | 200 |
| Result | Pending | Pending | Pending |
| Note: A Defective is defined as a unit of product that contains one or more defects.
A Defect is defined as any non-conformance of the inspected unit of product
with specified requirements. A single defect is taken into account
per each defective unit; only one most serious defect is taken into
account per each defective unit. |
3. Performance check:
To check the function & performance, we use different test for
different prdocuts and report all results.
| E. TESTS AND SPECIAL REQUIREMENTS: |
| E1. On-site Test |
| No. | Test Item | Test description / requirements | S/S | Result | Actual Finding / Comments |
1 | Carton Drop Test | Standard: ISTA-1A Height: See Comment x 10time (1 corner/3 edges/6 sides), Carton
should not break, unit box should not be damaged, and no product
should be damaged. (At least 1carton per style of packaging) | NIL | NIL | N/A |
2 | Quantity Check Per Carton | Open 260 cartons and count the quantity inside - should match the
spec and shipping marks. | 20cartons | Passed | No failure |
3 | 3M tape test | Check the printing | 50pcs | Passed | No failure |
4 | Basic function test | Test all detailed function | 200pcs | Passed | No failure |
4. Measurement check:
Measure product each part size, also carton/gift box size and
weight as below:
| D. PACKING AND PACKAGING |
| D1. Packing Measurement | |
| Description | Master packing Size(cm) LxWxH | Master packing Weight(kg) |
PO/ SPEC | Shipping mark | Actual | PO/ SPEC | Shipping mark | Actual |
| Pool Cues-Red | NIL | 48x23x85cm | 48.5x23x85cm | NIL | 13/14.3kgs | 15.7kgs |
| Pool Cues-Blue | 13.8/15.2kgs | 15.5kgs |
| Pool Cues-Green | 13.5/14.9kgs | 15.3kgs |
| Pool Cues-Yellow | 13.3/14.6kgs | 16kgs |
| Result: Pending |
If you are worried about or have experienced problems such as poor
quality, incorrect shipments, or wrong packaging for goods imported
from China, product inspection services is your solution. Summit
can help you have accurate understanding about the quality of the
goods without going to the factory by yourself.
As a Chinese company, Summit focuses on quality control services in
China.
We constantly strive to realize this vision and endeavour to serve
our customers, our community, and one another, to the best of our
ability.
