Hot Selling Product Inspection - Puzzle Case - Pre-shipment Inspection Services:
SUMMIT was founded in 2017 with an international inspection &
sourcing services provider registered in China. We are a
professional independent, third-party quality control services
provider, working in your interest to protect your production
conformity and quality in the supply chain.
Our service includes:
1. Quality inspection;
2. The third party inspection;
3. Pre-shipment inspection;
4. Factory audit;
5. Container loading supervision;
6. Production monitoring;
Products we inspect:
1. Garments, Textiles, Fabric, Shoes, Bags etc.
2. Home furnishing and building materials
3. Decorations, stationery
4. Electronics and other electrical devices, household appliances
5. Digital products and accessories, including tablet PC, Smart
phone, MP3, MP4, Blue tooth series products
6. Toys and juvenile products
7. Other products: car parts, jewelry, watches, tools, hardware
etc.
Pre-shipment inspection service include:
General on-site checking includes:
| √Quantity | √Product appearance |
| √Performance & function tests | √Workmanship |
| √Assembly | √Accessories |
| √Material | √Colors & logo |
| √Size & measurements | √Weight |
| √Assortment | √Carton condition |
| √Bar code scan test | √Packing & marking |
| √Shipping marks | √Warehouse condition |
What's the cost:
Our standard all-inclusive inspection cost is USD 128-218/man-day (no hidden fees) in any major manufacturing clusters in China.
Values included:
√ No extra charge for travel cost
√ No extra charges for inspections on Saturday or Sunday
√ Full-time experienced inspectors only
√ A detailed inspection report issued within 24 hours
√ Free consultancy before and after inspections
Product check (included but not limited to):
1. Quanity check:
The quantity check include ordered quantity, finished quantity,
unfinished quantity, packed and unpacked quantity, all data will be
recorded as below:
B. QUANTITY CHECK *Client’s requirement: Minimum of products finished for inspection: 80% 90% 100% Minimum of finished products packed into master cartons for
inspection: 80% 90% 100% |
| Description | Order Qty | Qty / Carton | Carton Qty | Quantity Breakdown | Sample Size |
| Packed | Unpacked | Unfinished | Packed | Unpacked |
| Puzzle Case | 1000 | 5 | 200 | 0 | 1000 | 0 | 0 | 160 |
| Total | 1000 | 5 | 200 | 0 | 1000 | 0 | 0 | 160 |
| Result: Pending (100% finished but not pack into carton) |
2. Workmanship check:
This is the most important part of inspection, our inspector will
conduct full check as per the client's requirement. All defects
will be recorded in the report with pictures and comments.
| INSPECTION STANDARDS |
| Inspection standard | ANSI/ASQC Z1.4(formerly known as MIL-STD-105) |
| Sampling plan (Single) | 160pcs |
| General Inspection Level (Visual / Workmanship) | N/A |
| Workmanship: AQL for Critical / Major / Minor | N/A |
| Total number of packages (cartons) / No. of cartons selected and
inspected(Sampled cartons quantity is at least square root (√) of total
cartons quantity of this lot) | Not packing into cartons |
| Number list of the selected cartons / packages | N/A |
| A. VISUAL & WORKMANSHIP |
| Product description | S/S (sets) | Defective Description | Critical | Major | Minor |
| Puzzle Case | 160pcs | Thread ends | 0 | 0 | 7 |
| Glue mark | 0 | 0 | 4 |
| White point | 0 | 0 | 1 |
| Dirty | 0 | 0 | 6 |
| Poor sewing | 0 | 0 | 5 |
| Impression mark | 0 | 0 | 2 |
| Scratch mark | 0 | 1 | 0 |
| Broken | 0 | 1 | 0 |
| Total Defects Found | 0 | 2 | 25 |
| Max Allowed | 0 | N/A | N/A |
| Sample Size | 160 | 160 | 160 |
| Result | Pending | Pending | Pending |
| Note: A Defective is defined as a unit of product that contains one or more defects.
A Defect is defined as any non-conformance of the inspected unit of product
with specified requirements. A single defect is taken into account
per each defective unit; only one most serious defect is taken into
account per each defective unit. |
3. Performance check:
To check the function & performance, we use different test for
different prdocuts and report all results.
| E1. On-site Test |
| No. | Test Item | Test description / requirements | S/S | Result | Actual Finding / Comments |
1 | Carton Drop Test | Standard: ISTA-1A Height: See Comment x 10time (1 corner/3 edges/6 sides), Carton
should not break, unit box should not be damaged, and no product
should be damaged. (At least 1carton per style of packaging) | N/A | N/A | No failure |
2 | Quantity Check Per Carton | Open 1 cartons and count the quantity inside - should match the
spec and shipping marks. | 1cartons | Passed | 5pcs per carton |
3 | 3M tape test | With 3M tape | 5pcs | Passed | No failure |
4 | Bar code scanning test | Perform the bar code scanning test and the number should be correct | 5pcs | Passed | No failure |
5 | Tension test | Pull the product by hand force. | 5pcs | Passed | No failure |
6 | Function check | Per normal using | 160pcs | Passed | No failure |
4. Measurement check:
Measure product each part size, also carton/gift box size and
weight as below:
| D1. Packing Measurement | |
| Description | Master packing Size(cm) LxWxH | Master packing Weight(kg) |
| PO/SPEC | Shipping mark | Actual | PO/SPEC | Shipping mark | Actual |
| Puzzle Case | NIL | 92x68x15cm | 92.7x67.8x15.6cm | NIL | 21kg | 21.19kg |
| Result: Pending |
If you are worried about or have experienced problems such as poor
quality, incorrect shipments, or wrong packaging for goods imported
from China, product inspection services is your solution. Summit
can help you have accurate understanding about the quality of the
goods without going to the factory by yourself.
As a Chinese company, Summit focuses on quality control services in
China.
We constantly strive to realize this vision and endeavour to serve
our customers, our community, and one another, to the best of our
ability.
