Hot Selling Product Inspection - Whistle - Pre-shipment Inspection Services:
SUMMIT was founded in 2017 with an international inspection &
sourcing services provider registered in China. We are a
professional independent, third-party quality control services
provider, working in your interest to protect your production
conformity and quality in the supply chain.
Our service includes:
1. Quality inspection;
2. The third party inspection;
3. Pre-shipment inspection;
4. Factory audit;
5. Container loading supervision;
6. Production monitoring;
Products we inspect:
1. Garments, Textiles, Fabric, Shoes, Bags etc.
2. Home furnishing and building materials
3. Decorations, stationery
4. Electronics and other electrical devices, household appliances
5. Digital products and accessories, including tablet PC, Smart
phone, MP3, MP4, Blue tooth series products
6. Toys and juvenile products
7. Other products: car parts, jewelry, watches, tools, hardware
etc.
Pre-shipment inspection service include:
Pre-Shipment Inspection (PSI), also known as Final Random
Inspection, is the most common inspection type to confirm the whole
shipment’s quality level. The international standards we used is
MIL STD - 105 E/
ANSI/ASQ Z1.4-2008 (AQL).
General on-site checking includes:
| √Quantity | √Product appearance |
| √Performance & function tests | √Workmanship |
| √Assembly | √Accessories |
| √Material | √Colors & logo |
| √Size & measurements | √Weight |
| √Assortment | √Carton condition |
| √Bar code scan test | √Packing & marking |
| √Shipping marks | √Warehouse condition |
What's the cost:
Our standard all-inclusive inspection cost is USD 128-218/man-day (no hidden fees) in any major manufacturing clusters in China.
Product check (included but not limited to):
1. Quanity check:
The quantity check include ordered quantity, finished quantity,
unfinished quantity, packed and unpacked quantity, all data will be
recorded as below:
B. QUANTITY CHECK *Client’s requirement: Minimum of products finished for inspection: 80% 90% 100% Minimum of finished products packed into master cartons for
inspection: 80% 90% 100% |
| Description | Order Qty | Qty / Carton | Carton Qty | Quantity Breakdown | Sample Size |
| Packed | Unpacked | Unfinished | Packed | Unpacked |
| Whistle | 1440 | 144 | 10 | 1440 | 0 | 0 | 125 | 0 |
| Total | 1440 | 144 | 10 | 1440 | 0 | 0 | 125 | 0 |
| Result: Passed |
2. Workmanship check:
This is the most important part of inspection, our inspector will
conduct full check as per the client's requirement. All defects
will be recorded in the report with pictures and comments.
| INSPECTION STANDARDS |
| Inspection standard | ANSI/ASQC Z1.4(formerly known as MIL-STD-105) |
| Sampling plan (Single) | Normal |
| General Inspection Level (Visual / Workmanship) | Level II |
| Workmanship: AQL for Critical / Major / Minor | Not Allowed / 2.5 / 4.0 |
| Total number of packages (cartons) / No. of cartons selected and
inspected(Sampled cartons quantity is at least square root (√) of total cartons quantity of this lot) | Randomly selected quantity: 4cartons |
| Number list of the selected cartons / packages | N/A |
| A. VISUAL & WORKMANSHIP |
| Product description | S/S (sets) | Defective Description | Critical | Major | Minor |
| Whistle | 125sets | Rust stain mark | 0 | 0 | 125 |
| Surface particles mark | 0 | 0 | 1 |
| Poor laser marking mark | 0 | 0 | 1 |
| Rack of fusion mark | 0 | 3 | 3 |
| Water spots mark | 0 | 0 | 4 |
| Total Defects Found | 0 | 3 | 125 |
| Max Allowed | 0 | 7 | 10 |
| Sample Size | 125 | 125 | 125 |
| Result | Pass | Pass | Failed |
| Note: A Defective is defined as a unit of product that contains one or more defects.
A Defect is defined as any non-conformance of the inspected unit of product
with specified requirements. A single defect is taken into account
per each defective unit; only one most serious defect is taken into
account per each defective unit. |
3. Performance check:
To check the function & performance, we use different test for
different prdocuts and report all results.
| E1. On-site Test |
| No. | Test Item | Test description / requirements | S/S | Result | Actual Finding / Comments |
1 | Quantity Check Per Carton | Open 4 cartons and count the quantity inside - should match the
spec and shipping marks. | 4cartons | Pass | No failure found |
2 | Function test | Basic function | 125sets | Pass | No failure found |
3 | Rub test | Color lose or not | 5sets | Pass | No failure found |
4 | Carton Drop test | 60cm*10time | 1ctn | Pending | The factory refused to do drop test. |
5 | Barcode scanning test | Basic function | 5sets | Pass | No failure found |
6 | 3M tape test | Color lose or not | 5sets | Pass | No failure found |
7 | Smell check | Whether the product has an odor | 5sets | Pass | No failure found |
4. Measurement check:
Measure product each part size, also carton/gift box size and
weight as below:
| D1. Packing Measurement | |
| Description | Master packing Size(cm) LxWxH | Master packing Weight(kg) |
| PO/SPEC | Shipping mark | Actual | PO/SPEC | Shipping mark | Actual |
| Whistle | NIL | 30x25x20cm | 28.9x24.6x19.7cm | NIL | NIL | 5.50kgs |
| Result: Pending |
If you are worried about or have experienced problems such as poor
quality, incorrect shipments, or wrong packaging for goods imported
from China, product inspection services is your solution. Summit
can help you have accurate understanding about the quality of the
goods without going to the factory by yourself.
As a Chinese company, Summit focuses on quality control services in
China.
We constantly strive to realize this vision and endeavour to serve
our customers, our community, and one another, to the best of our
ability.
